The Phoenix Axial Mover operator interface is conveniently located for easy access, featuring: power indicator lamp, three-position switch, hour meter, FCI outlet, and circuit breaker, eliminating nuisance trips to the breaker box.

Performance

• Greater air velocities than competitive products
• Focused velocities 0 to over 23.5 feet
• Directs air flow towards problematic corners, where the wall meets the floor
• Capable of reducing secondary damage claims stemming from the side-effects of trapped humidity like fungi, mold, mildew or structural damage
• 3000 cfm
• Long-life 2-speed motor
• Low noise, quiet operation
  
  Packaging

• Lightweight and compact linear low density polyethylene (LLDP) housing is washable, chemical resistant and stacks for storage
• Colored Restoration Red for high visibility
• Ergonomic handle
  
  Features
  
• Power-on indicator light
• Automatic hour meter displays site run time
• On-board power management:
• Circuit breaker protects air mover and attached devices and prevents nuisance visits to the junction box
• GFCI protection promotes operator safety in wet applications
• Duplex AC outlet allows daisy chaining of up to four axial air movers
• 20 ft AC cord with cord management
• Units interlock for ease of stacking during storage and handling
• Weighs 2.5 lbs less than competitive units
  
  Phoenix Axial Air Mover Specifications
• Part No.: 4025200
• Drive Motor: 1/4 hp 1-phase 110/120 VAC 2-speed
• 4-pole, PSC Electric Motor
• CFM: Approximately 3000
• Cord: 20 ft Power Cord
• Outlet: 15A UL Rated GFCI Duplex Receptacle
• Current Draw: 2.5 Amps
• Voltage: 115 VAC
• Warranty: Year One - 100% parts and labor (all components);
• Year Two - 100% parts only (all components);

Year(s) Three through Seven - Only materials and
workmanship of the housing are covered

Dimensions

• Machine Shipping
• Width: 19.9" 19.25"
• Height: 19.5" 20"
• Depth: 15.2"
  (intake to exhaust) 15.5"
• Weight: 29.5 lbs 32.7 lbs